QAD Warehousing Release Notes > Release Notes for Current Release > Additions
A new Item-Warehouse Browse (4.4.21) was added to QAD Warehousing to display item-warehouse information. The new browse includes the following fields:
Site, warehouse
SLG and SLG list
OPC threshold
Logistics UM
Inspection, required, frequency (part and days)
Item ID, item number and type, and quantity
Auto replenishment percentage and auto-replenish by part
Modified date
User ID
Pallet Constitution/Transfer (80.17.20) now correctly retains the inventory status of the existing inventory at the location for the created pallet when inventory and location inventory statuses are different and the To Location is blank. Also, the program retains the inventory status of existing inventory when you transfer inventory to another valid location and set Keep From Status to Yes in Work Location Group Maint(80.3.9). Previously in the above scenarios, the system changed the inventory status to the default inventory status of the location where inventory existed.
The following programs now update the detail pick quantity that displays in Inventory Detail Inquiry (80.9.13) and the quantity to ship that displays in Pre-Shipper/Shipper Report (7.9.6) when you increase the item quantity while confirming a sales order pick task and the pallet picked is not a multi-item pallet. Previously, the system did not update the detail pick and quantity to ship and displayed the previous values.
Movement Conf. Workbench (80.8.4)
Movement Conf. By Transaction (80.8.1)
Movement Conf. By Location (80.8.2)
Movement Conf. By Order (80.8.3)
RF Next Task (1.1) option
RF Select Task (1.2) option
RF Batch Pick-SO (3.1) option
RF Batch Pick-All (3.2) option
Task Assignment Maintenance (80.11.7) now correctly displays labels in non-English languages. Previously, User Name, Queue, Confirmation Mode, and other labels were not translated into other languages and only displayed in English.
Replenishment List Maintenance (80.16.1) and the RF Kanban Scan (1.5) option now correctly create the pick replenishment task as per the routing sequences you specify in Internal Routing Maintenance (80.2.5) when there are more than two sequences and the replenished location you specify exists in the internal routing group of the last sequence. Previously, the system created the pick replenishment task directly for the location you specified, skipping the internal routing sequences.
Sample Inspection Maintenance (80.22.1) now displays sample inspection data and no longer displays an error message when you enter a receiver number in the Receiver field of selection criteria after you complete a PO shipper receipt using the RF PO Receipt (1.8) option. Previously, in the above scenario, the system displayed an error that informed you that the input data did not match a record and did not display data.
The following programs now correctly verify the quantity at the source location while confirming a task:
RF Movement Conf. By Location (80.8.2)
Movement Conf. By Order (80.8.3)
Movement Conf. Workbench (80.8.4)
Movement Conf. Processor By Tran (80.8.5)
Movement Conf. Inquiry Format (80.8.6)
The RF Receipts (1.8) option now creates DO receipt transactions that display in Warehouse Transaction Inquiry (4.9.1) when you receive a distribution order. Previously, the system did not create the DO receipt transactions.
Transfer Single Item (80.17.4) no longer displays an error that informs you that the period has been closed for another entity for the site when you close the GL period for the primary entity in GL Calendar Maintenance (25.3.4) and the effective date falls within the closed period. Previously, the error displayed and you could not continue processing.
The RF Preship Sel Task (1.7) now displays pre-shipper, priority, and line information on RF scanners. Previously, you could not view priority and line information on RF scanners.
The RF Receipts (1.8) option now displays an error informing you that a lot/serial number is required for lot/serial-controlled items when you enter a blank in the L/S field and the quantity you enter must be 1 when you enter a quantity other than zero or 1 for a serial-controlled item on the RF screen. Also, the system no longer creates a PO receipt task when these conditions exist. Previously, the error displayed after you entered blank data and the system created a PO receipt task in Transactions Detail Inquiry (3.21.1).
The following programs no longer display an error that informs you that you cannot enter a code value longer than the defined field length when you have QAD Warehousing set up and generate pallet numbers:
Receipts - Unplanned (3.9)
Purchase Order Receipt (5.13.1)
Work Order Receipt Backflush (16.12)
The system no longer hangs on Oracle when you run a shipment confirmation using the RF Ship Truck (3.5) option. Previously, when you entered the RF Ship Truck program in the RF device, entered a location, left the carrier shipment reference, vehicle ID, master BOL blank, then pressed F4 to confirm the shipment, the system stopped processing.
Storage Location Group Maint (4.3.1) now correctly displays the default values from Internal Routing Group Maint (4.2.1) in the following fields when you create a new storage location group:
Allow Issues
Allow Receipts
Allow Incoming Returns
Allow Outgoing Returns
It also displays default values from Warehouse Maintenance (4.1.1) for the following fields:
Opportunity Counts
OPC Frequency
Check Digits
Count Status Option
Previously, the values were not defaulted for the fields.
Mass Location Maintenance (4.3.21) no longer lets you specify a blank or an invalid location in the Template Location field and now displays an error informing you of the invalid location and prevents you from continuing. Previously, you could specify a blank or an invalid location in the field, which caused Progress issues.
Algorithm Assignment Browse (4.6.10) now correctly displays the algorithm, sequence, employee, user ID, and modified date data. Previously, the browse did not display this data.
Mass Location Maintenance (4.3.21) no longer displays Progress internal errors when you delete a range of locations and the location sequence definition in use has four sequences you define in Sequence Definition Maintenance (4.23.1).
Allocated Inventory Inquiry (3.18) and Stock Availability Browse (3.17) now correctly display the quantity allocated and picked when you delete a pre-shipper in Pre-Shipper/Shipper Workbench (7.9.2) after the system exploded the pre-shipper and the RF Pallet Explosion (3.6) option created more than one reference.Previously in this scenario, the system displayed incorrect Qty Alloc and Picked field values.
DO Pre-Shipper/Shipper Maint (12.19.3) no longer displays an error for invalid sites when you add a container that you create using the RF Pallet Explosion (3.6) or RF Container Build (3.3) options and you define a DO ship-to site in Site Maintenance (1.1.13).
The RF Pallet Explosion (3.6) option no longer displays Progress errors that inform you that the entry is outside of a range of list or that an invalid character was input when you generate a pallet and respond Yes to confirm the pallet build.
Mass Location Maintenance (4.3.21) no longer displays an invalid location error when you enter a blank or invalid location and specify to delete in the Create/Delete Location field. Previously, the system displayed the error once you entered the site.
DO Pre-Shipper/Shipper Maint (12.19.3) now displays the delete option for the following fields in character mode and displays the Delete button for the frame in .NET UI with the fields:
Document Format
Consolidate Ship
Inventory Scrap Transaction (3.14) no longer displays an error that informs you that the lot/serial has expired when you scrap an expired item. Previously, the error displayed and you could not scrap expired items.
Wave Close Batch/Report (4.15.18) now correctly processes in batch mode. Previously, when you entered a batch ID and viewed the batch ID in Batch Request Detail Maintenance (36.14.3), the parameter data was blank because the Wave Close Batch Report did not work in batch processing.
The RF Transfer (1.3) option now correctly rounds the item quantity to transfer to the destination location when the quantity you specify is more than the available capacity at the destination location and the system calculates the quantity to transfer in decimals. Previously, the item quantity transferred was not rounded correctly.
The RF Transfer (1.3) option no longer prompts for the destination location, jumps to the starting frame, or creates canceled tasks without user validation when you set the system flavor to B in Warehouse Maintenance (4.1.1) and transfer without exiting the RF session after you delete the previous multi-item pallet task.
The following programs no longer display a Progress error and correctly display the quantity for a pre-shipper line when you set the Completion, Fail and Repick field to option 3 in Warehouse Maintenance (4.1.1) and pick a partial quantity:
RF PreShip Sel Task (1.7)
RF Batch Pick SO/DO (3.1)
RF Batch Pick All (3.2)
Movement Confirmation by Transaction (4.8.1)
Movement Confirmation by Location (4.8.2)
Movement Confirmation by Order (4.8.3)
Movement Confirmation Processor (4.8.5)
Movement Confirmation Workbench (4.8.7)
Previously, the system displayed an incorrect pre-shipper quantity and a Progress error in this scenario.
The RF Build Pallet (1.12) now correctly updates the percentage full of the source location that displays in Warehouse Location Maintenance (4.3.13) when you generate a pallet for existing non-multi item inventory at the source location. Previously, the system displayed incorrect percentage full values.
Reference Generation (4.17.9) now generates the print identification task for reference when you set the Generate Identification and Print ID fields to Yes in Internal Routing Maintenance (4.2.5). Previously, the print identification task did not generate.
Distributed Order Receipt (12.15.20) no longer displays an error that informs you that the reference is in use and lets you continue processing when you receive items with the same reference number which exists in another warehouse location. Previously, in this scenario, the system displayed an error and you could not continue processing.